青青草国拍自产免费

    1. <li id="3n3yc"><acronym id="3n3yc"></acronym></li>
        <tbody id="3n3yc"><pre id="3n3yc"></pre></tbody>
        <tbody id="3n3yc"></tbody>
      1. Paper Making Machine

        Zheng Da Qing Ke Hi-tech Machinery Co., Ltd is a professional manufacturer and supplier of paper production line, drying and ventilation equipment and paper pulp machine in China.

        « Type of Turnkey PlantsPulp Machine »

        Pulp Machine

        This pulp machine is mainly utilized in paper mills, and it consists of double wire former, press section and air drying system. And in the following, more information about them will be given.

        Double wire former

        The double wire former is composed of hydraulic headbox, dewatering system, pressure dewatering box, wire stretcher, rectifier and cleaning system.
        Press section

        Press section covers vacuum pre-press, vacuum press and wide nip press.
        This press section is designed based on a full consideration of pulp machines features to make sure that pulp machine has a better dewatering efficiency.
                   
        Air drying section

        The principle of drying the pulp board is flotation without contact, in the multi-stack dryer; the number of blow boxes and their layout depend on the actual production capacity.
        The paper sheet runs between the top and the bottom blow boxes. Its dried by the impingement air containing the heat energy and the impinging power, the air cushion supports the paper sheet to guarantee a stable running of sheet.
        The top and the bottom blow boxes are lifted by the cylinder to allow for the maintenance and cleaning.
              
        External air circulation system

        With a view to utilizing the power to a great extent, we usually apply a two-step heat recovery system to the hot air circulation outside the pulp board dryer. The primary air-air heat recovery unit uses the hot wet air exhausted from the top of the dryer to preheat fresh air. Being preheated, the fresh air is heated to the required temperature in heat exchanger before conveyed to the bottom of the dryer.
        The secondary air-water heat recovery unit heats the process water and ventilation water by utilizing the remaining heat of he waste air.
        A set of cooling air supply system is located at the bottom of the dryer. The pulp board is cooled before it leaves the drying section.
         
        Advantages of hot air pulp drying technology

        The drying section can be shortened by more than half, so that investment in civil construction is greatly saved.
        Lower stem consumption and even moisture distribution from pulp inner side  to surface.
        As the tension working on the pulp board in drying section becomes smaller, the pulp board can run more stably, and the possibility of web-break is diminished.

        • Articles related:

        Post comment:

        ◎welcome to give out your point.

        日歷

        New Comments

        Previous

        Copyright www.notinournamemusic.com Your WebSite. Rights Reserved.

        青青草国拍自产免费
        1. <li id="3n3yc"><acronym id="3n3yc"></acronym></li>
            <tbody id="3n3yc"><pre id="3n3yc"></pre></tbody>
            <tbody id="3n3yc"></tbody>